Expert Answers about Forest River

• Replacement Tarp for Replacement Tarp for Extang BlackMax Tonneau Cover on 1987 Ford F-150 Long Bed
• I assume you have are asking about an Extang tonneau cover on your 1987 Ford F-150 with an 8 foot bed, and the one that snaps on is the Extang BlackMax Soft Tonneau Cover - Snap On 2515. So long as this is the tonneau you have, the correct replacement tarp is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1515.
  view full answer...


• Trailer Hitch and Trailer Wiring for my 1965 International Scout 80
• While there are no custom fit hitches and wiring available for your Scout 80 I do have a couple of solutions for you. For the hitch use the Curt Adjustable Width Trailer Hitch Receiver part # 13703. This hitch offers adjustable side plates and can be attached to the frame of your Scout. You will have to drill holes for the installation of it or weld it on to the frame. For your wiring use the 4-Pole Trailer Connector and Installation Kit part # C59496 which can be wired to the harness...
  view full answer...


• Installing Industry Standard Rail Compatible 5th Wheel Hitch on 2017 Silverado 3500 with OEM Pucks
• The Reese 20K hitch from your 2012 Silverado, assuming it uses industry standard mounting rails mounted to the bed floor can be used on a 2017 Silverado 3500 by using the Demco # DM6194 adapter. The adapter installs in the housing for the gooseneck ball, and provide a set of industry standard bed rails for your hitch to attach to. Unfortunately, Reese doesn't offer a leg kit like what's used on the # RP30918 hitch that's compatible with the GM puck system. I've linked to a product demonstration...
  view full answer...


• Recommended Bike Carrier and Cargo Carrier Combo for 2006 Dodge Sprinter
• It sounds like you're probably talking about something like the Hollywood Racks Sport Rider SE2 Platform Bike Rack w/ Cargo Carrier # HR1450Z-85 which is a 2 bike carrier with a cargo carrier built in. This is a great multi-function carrier that will allow you to carry both bikes and cargo on the back of your 2006 Dodge Sprinter. If you would ever need to carry 4 bikes, I recommend instead going with the # HR1400Z-85 since it comes with a rear 2 bike platform that is removable and can be...
  view full answer...


• Recommended Hitch for 2009 Audi A4 Avant Wagon
• I was able to confirm with Curt that the correct hitch for the 2009 Audi A4 Avant Wagon is the Curt Class I Round Tube Receiver Hitch # C11195, which will provide you with a 1-1/4" Class I receiver on your vehicle. If you're going to be towing a light weight trailer with this hitch you'll also need trailer wiring and a ball mount/hitch ball combo. For the wiring I recommend using the Tekonsha # 119250KIT because we've found that the converter boxes on the Tekonsha kits are a bit more...
  view full answer...


• Adjusting Braking Power After Installation of Electric Trailer Brake Controller
• Your trailer wheels should not actually lock up. This is a common misunderstanding because locking the tires actually reduces traction and can cause more issues with your trailer tracking behind your vehicle. You do want your brakes to slow you as quickly as possible but you don't want them to lock up. With the Prodigy P2 # 90885, the adjustment knob set to the max level is going to deliver the most power, but you want to also make sure you have the boost settings set to the max for...
  view full answer...


• Caster Wheel Kit for Malone FS 6-Kayak Rack
• For the Malone FS kayak carrier part # MPG332 that you mentioned you'd only need the single Caster kit part # MPG333 for adding wheels and you'd be set. If you check out the picture I attached you'll see what it looks like installed.
  view full answer...


• Troubleshooting Trailer Turn Signal and Brake Lights Not Functioning on 2011 Nissan Frontier
• Sounds like you are missing the blue relays that activate the stop/turn circuits of the trailer wiring of your 2011 Nissan Frontier which we offer as part number # C57000. If you check out the attached picture you can see where they install. Or you can watch the install video I attached to see how the area is accessed too. It's behind the passenger side kick panel.
  view full answer...


• Which BOLT Hitch Lock Fits 2020 Jeep Grand Cherokee
• The correct BOLT hitch lock to match what your 2020 Jeep Grand Cherokee has is the part # BL7018447. This will key to your vehicle key so that you can use the same key for the lock and the vehicle.
  view full answer...


• Parts Needed to Flat Tow 2014 Jeep Wrangler Behind Motorhome
• First thing you'll need is a base plate kit to flat to your 2014 Jeep Wrangler, which for that I recommend the Roadmaster # RM-521448-5 as is one of the easiest to use options and also is mostly hidden when not in use. I attached an install video for this for you to check out as well. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain,...
  view full answer...


• Can Furrion Vision S RV Observation System Have Screen Size Upgraded
• Yes, we do offer the 7 inch monitor as a replacement part # FR47FR which I confirmed with Furrion can be used to replace your 5 inch monitor to upgrade it to the larger size.
  view full answer...


• Replacement Roof Rack Solution for Thule Tracker II Foot Pack 430 Needing Replacement Part
• You're in a tough spot as Thule has basically phased out your entire roof rack setup from the feet, to the bars, and the fit kit. I wish I had something I could offer that was simple and easy but based on your situation I would go with option 4 and replace everything. The best value on that is the Rhino Rack roof racks for factory tracks like the part # Y02-480B-NT for a 54 inch long bar setup. We also have 65 inch long with part # Y02-500B-NT. These kits fit the same channel dimensions...
  view full answer...


• Replacement OEM 7-Way For 2017 Toyota 4Runner
• We have replacement 7-ways that fit your 2017 Toyota 4Runner but the one you mentioned does not fit. So instead you'd want the # A10-7072VP which will plug right into the round connector you have at the rear of your vehicle and give you a new 7-way.
  view full answer...


• Wiring Needed to Install Brake Controller in 2005 Holiday Rambler Neptune
• You checked everywhere the brake controller install harness should have been if it was present. Your best option would be to make the hardwire connections instead. You could run a length of 10 gauge wire like part # 10-1-1 (sold by foot) from the 7-way up to the front of the vehicle. Then for running the power and ground wire up to the vehicle battery we have the double bonded wire set part # 10-2-1 which you could use for power and ground. You'll want a 40 amp breaker as well like # 9510. The...
  view full answer...


• LCI Solera Power Awning Replacement Motor
• It does sound as if your motor like Solera Power Awning Replacement Motor part # LC266149 is drawing too much power during operation causing the fuse to blow when using it. The motor itself offers a very easy installation process done with simple hand tools and already has the Solera plugs installed so you simply plug it right in. This can save you some of the expense at the dealer by doing it yourself. One other cause could be a short in one of the wires running up the arm of you awning...
  view full answer...


• Trailer Wiring Harness for 2020 Ford Escape for Use with Draw Tite Hitch
• The Draw Tite hitch part # DR47FR that fits your 2020 Ford Escape does not include trailer wiring but you can easily add that on with the part # TE54FR for a fit that is easy and overall very reliable! Not everyone who installs a trailer hitch plans to tow a trailer which is why the wiring wasn't included. Some people only want to carry a bike rack or cargo carrier. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts;...
  view full answer...


• Will a B&W Companion for the Ram Prep Package Work with Rotating Pin Boxes and my Ram Box Bed?
• To keep your fifth wheel from hitting the bed rail sides or Ram Boxes you are going to get that clearance from where the pin box is mounted in the wing plates on the camper itself you can raise or lower it to achieve the clearance you need for those Ram Boxes. You can also adjust your head in the Companion upwards by changing where the pivot arms are bolted in (see video below) at the 1:50 mark. We recommend at least 4" if not closer to 6 or 7" of clearance. If your are close to the 4"...
  view full answer...


• Tips for Installing Trailer Cam Door Style Latch on Trailer With Door that Isn't Flush
• To use a cam door style trailer latch on a trailer door that sticks out 1 inch past surface you'd want to use a spacer behind the latch mechanisms that attach on the door. I'd also go with a setup like the part # PLR258-002-SS which allows you to provide your own bar. You could attach the latch on top of the bar so that you get more offset as well.
  view full answer...


• Recommended Transmission Cooler/Fan Combo for a 2008 GMC Sierra 3500 with Duramax
• Yes, we absolutely have remote mount transmission cooler and fan combos that will work on your 2008 GMC Sierra 3500. For this, I recommend Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960. The Derale Hyper-Cool is an excellent option that will drastically decrease transmission fluid temperatures so you won't have any issues towing heavy loads or towing through mountains or steep inclines for that matter. This is important because increased transmission fluid temperatures result...
  view full answer...


• Do you Have a Replacement Hardware Kit for Curt Hitch part # C13186?
• We have exactly what you will need. The Curt Replacement Hardware Kit for Trailer Hitches part # RHK will give you all of the hardware you need to get the hitch installed. Below you will find the instructions linked for specifications and a video we did on a 2017 for your reference.
  view full answer...